
| Feature | Benefit |
| All-Dielectric Construction | Zero metallic components — complete EMI immunity, no bonding or grounding |
| Aramid Yarn Strength Member | High tensile strength with low weight; supports spans up to 1,200 m |
| Gel-Filled Loose Tubes | Water-resistant compound protects fibers over 25+ year service life |
| Anti-Tracking (AT) Sheath Option | Special PE compound resists surface tracking on lines up to 220 kV |
| FRP Central Strength Member | Crush resistance and dimensional stability across -40°C to +70°C |
| SZ-Stranded Construction | Round, compact profile for uniform stress distribution |
| Parameter | Value |
| Fiber Count | 2–144 cores (SM G.652.D / G.655) |
| Outer Diameter (PE/AT) | 12.5 – 17.9 mm |
| Weight (PE/AT) | 125–249 kg/km / 136–266 kg/km |
| Max Working Tension | 1.5 – 18.0 kN |
| Break Strength | 10 – 120 kN |
| Strength Member CSA | 4.6 – 58.8 mm² |
| Elastic Modulus | 7.6 – 26.1 kN/mm² |
| Thermal Expansion | -0.8 – 1.8 × 10⁻⁶/K |
| Max Span (Typical) | 100 – 1,200 m |
| Operating Temperature | -40°C to +70°C |
| Standards | IEC 60794-1-2, IEC 60794-3-20, ISO 9001:2015 |
The anti-tracking (AT) sheath is specified above 35 kV, where dry-band arcing erodes standard PE.
AT compound resists surface tracking on lines up to 220 kV.
PE sheath remains the standard choice for lower-voltage and distribution lines.
AT sheath supports 25+ year service life under sustained electric field.
Sheath type is fixed at order stage together with span and core count.
OPELINK ADSS cable covers 2 to 144 cores in single-mode G.652.D or G.655 fiber.
Outer diameter ranges from 12.5 mm to 17.9 mm.
Weight is 125–249 kg/km with PE sheath and 136–266 kg/km with AT sheath.
Higher core counts use larger strength member cross-sections, up to 58.8 mm².
Yes. ADSS cable is tested to IEC 60794-1-2 and its design is specified under IEC 60794-3-20.
All published values are measured per IEC 60794-1-2.
Mechanical and environmental tests follow the same standard series.
Production is managed under ISO 9001:2015 with full traceability.
Yes. IEC 60794 testing is performed on every production batch under ISO 9001:2015.
Test records accompany each shipment for incoming inspection.
Traceability links fiber, sheath compound and strength member to the batch.
500+ km has been deployed across SE Asia, Middle East and South America.
Stringing tension must not exceed the rated maximum working tension, which ranges from 1.5 kN to 18.0 kN.
Allowable working tension per cable is 4–50 kN; break strength is 10–120 kN.
Final tension is set by sag-tension calculation per IEEE 1222 for the actual span.
Ice and wind loading assumptions change the permitted tension.
Each loose tube is filled with a water-resistant compound that blocks longitudinal water migration.
Gel filling protects the fibers over a 25+ year service life.
The stranded core and sheath add a second barrier against moisture.
Water-blocking performance is verified within the IEC 60794 test programme.
Span reaches 1,200 m under NESC light loading, with a typical working range of 100–1,200 m.
Span is governed by RTS, sag and ice/wind loads rather than core count alone.
OPELINK runs sag-tension calculations per IEEE 1222 for each project.
Longer crossings are engineered case by case against the cable break strength.
ADSS cable is rated for continuous operation from -40 °C to +70 °C.
The FRP central strength member holds dimensional stability across the full range.
Thermal expansion is low, from -0.8 to 1.8 × 10⁻⁶/K depending on the design.
Low expansion keeps sag stable through seasonal temperature swings.
Standard ADSS orders ship in 2–3 weeks; custom span engineering takes 5 business days.
Quotations are prepared from voltage level, span, core count and sheath type.
Ice and wind load data plus RTS allow a sag-tension check before order.
Documents issued with the quotation follow IEC 60794 and ISO 9001:2015 records.
| Ref. of outer diameter mm | Ref. weight kg/km |
Ref. Max workingtension KN |
Max allowable working tension KN |
Break strength KN |
Strength member CSA mm² | Modulus of elasticty KN/mm² | Heat expansion coefficient×10-6/k | |
| PE | AT | |||||||
| 12.5 | 125 | 136 | 1.5 | 4 | 10 | 4.6 | 7.6 | 1.8 |
| 13.0 | 132 | 142 | 2.25 | 6 | 15 | 7.6 | 8.3 | 1.5 |
| 13.3 | 137 | 148 | 3.0 | 8 | 20 | 10.35 | 9.45 | 1.3 |
| 13.6 | 145 | 156 | 3.6 | 10 | 24 | 13.8 | 10.8 | 1.2 |
| 13.8 | 147 | 159 | 4.5 | 12 | 30 | 14.3 | 11.8 | 1.0 |
| 14.5 | 164 | 177 | 5.4 | 15 | 36 | 18.4 | 13.6 | 0.9 |
| 14.9 | 171 | 185 | 6.75 | 18 | 45 | 22.0 | 16.4 | 0.6 |
| 15.1 | 179 | 193 | 7.95 | 22 | 53 | 26.4 | 18.0 | 0.3 |
| 15.5 | 190 | 204 | 9.0 | 26 | 60 | 32.2 | 19.1 | 0.1 |
| 15.6 | 194 | 208 | 10.5 | 28 | 70 | 33.0 | 19.6 | 0.1 |
| 16.3 | 211 | 226 | 12.75 | 34 | 85 | 40.0 | 20.1 | 0.1 |
| 16.8 | 226 | 242 | 15.45 | 41 | 103 | 48.0 | 24.0 | -0.4 |
| 17.2 | 236 | 253 | 16.2 | 45 | 108 | 51.0 | 25.1 | -0.5 |
| 17.9 | 249 | 266 | 18 | 50 | 120 | 58.8 | 26.1 | -0.8 |

